Filter
Top Products
44 FSN Series • User’s Guide • Rev 01
2. FSN-1400 Orientation
Card Descriptions
póëíÉã=`~êÇ
Card status: Required
Slot number: 14
Maximum number of cards per chassis: 1
The System Card provides the following functions:
• System control, CPU, timing, and video reference (input, loop and output).
• Ethernet port 10/100, two serial outputs, Tally (24 contact closures).
• GPIO (four input ports, eight output ports).
• RS-232 port (diagnostics only).
The figure below illustrates the System card’s front edge and rear panel connectors:
Figure 2-4. System card front edge and rear panel connectors
Important
This card is pre-installed in the FSN-1400. Do not move the
card to any other slots.
GPIO
Tally
Ref In
Loop
Ref Out
Ethernet
Serial 2
Serial 1
11
12
13
10
9
14
15
Power
Loaded
RS-232
CPU
IP
SYS
System Card
Front Edge Rear Panel
1
4
6
5
3
2
3
8
7
1) System Power LED 6) Diagnostic Port 11) Ref In
2) Video Reference LED 7) CPU Reset Switch 12) Loop
3) Ejectors 8) IP Address Reset Switch 13) Ref Out
4) Card Power LED 9) Serial Ports 14) Tally Connector
5) Loaded LED 10) Ethernet Port 15) GPIO Connector