Filter
Top Products
244 FSN Series • User’s Guide • Rev 01
5. Menu Orientation
System Menu
lìíéìí=~åÇ=mêçÅÉëë=m~åÉä
From the UOC Setup Menu, press {Output and Process} to display the Output and
Process Panel, which is divided into three sections plus several tool bar functions. Each
section is explained below.
• Output Section
• Output Processing Section
• Output Status Section
• Output and Process Tool Bar Functions
• Advanced UOC Output Setup Menu
lìíéìí=pÉÅíáçå
The figure below illustrates the Output Section on the Output and Process Panel:
Figure 5-115. Output Section, Output and Process Panel
The following adjustments are provided:
• Press {Output Format} to display the Output Format Keypad. Use the up (S)
and down (
T) arrows to locate the desired output format in the list, then press
{Apply} to set the new Aux output format. In Appendix A, see the “Input and
Output Format Tables” section on page 445 for the complete list of formats.
• Press {Advanced Output Setup} to display the Advanced UOC Setup Menu,
which enables you to adjust advanced UOC output parameters. Refer to the
“
Advanced UOC Output Setup Menu” section on page 247 for details.
Output
and
Process
Output
Format
Output
Adv.
Output
Setup
Output
Format
Adv.
Output
Setup
Caution
The Advanced UOC Setup Menu is designed for advanced
users who are completely familiar with all aspects of output
timing adjustments. Do not use this menu if you are uncertain
about any output timing parameter.