Filter
Top Products
FSN Series • User’s Guide • Rev 01 345
7. Operations
Working with Memory Registers
~ If currently unlocked, press {Lock Unlock} to lock the register. An “X”
appears in the table cell under the
Lock heading. The register can not
be deleted or over-written.
~ If currently locked, press {Lock Unlock} to unlock the register and
remove the “
X” from the table cell. The register can now be deleted and
over-written.
6. Repeat from step 3 to lock or unlock additional registers.
aÉäÉíáåÖ=jÉãçêó=oÉÖáëíÉêë
The View Mode is the only mode in which you can delete registers.
Use the following steps to delete memory registers:
1. Ensure that you are not in the Store or Recall modes. If so, cancel the mode.
2. Navigate the Memory Menu using one of the following methods:
~ In the Menu Bar, press {Page} to display page 2 (if required). Then,
press the
{Memory} button.
~ Press and hold either the STORE or RECALL button in the control
panel’s
Memory Section.
3. Select the register that you want to delete. Two methods are available:
~ Turn the knob adjacent to the {Memory Register} button to scroll to the
desired register.
~ Press the {Memory Register} button, then on the keypad, enter the
desired register and press
{Enter}.
4. Press {Advanced} to display the Advanced Memory Menu.
5. Ensure that the register is unlocked. If not, unlock it using {Lock Unlock}.
6. Press the {Delete Register} button to delete the register. When the “confirm”
pop-up appears, press
{Yes}.
7. Repeat from step 3 to lock or unlock additional registers.