Filter
Top Products
230 FSN Series • User’s Guide • Rev 01
5. Menu Orientation
System Menu
bñíÉêå~ä=aph=q~ÄäÉ
The External DSK Table provides information about each input. The yellow highlight
automatically tracks the selected input connector in the
Rear I/O View.
Figure 5-104. External DSK Table (sample)
The following columns of information are provided:
• Name — indicates the name of the selected connector (DSK Cut or DSK Fill).
• Format — displays the input’s format.
• Error Reporting — “On” indicates that the connector is enabled and error
reporting is active. “
Off” indicates that error reporting is prevented. Use the
{Error Reporting} toggle button to toggle the function.
• Sync Mode — lists the mode selected with the {Sync Mode} button — either
Auto, Frame Sync or Minimum Delay.
aph=`ìí=pÉíìé
To set up the DSK Cut input, touch its connector in the Rear I/O View. The menu changes
to display the input’s setup functions.
In the
Sync section, two functions are available:
• Press {Sync Mode} to display the Sync Mode Pop-up, which enables you to set
the selected DSK input’s sync mode. Refer to the “
Understanding Sync Mode”
section on page 211 for complete details.
• When the selected DSK input’s sync mode is set to Auto and the system switches
to
Auto: Frame Sync, the system stays in that mode until the sync detection is
manually refreshed. Press
{Refresh Sync} to refresh the sync detection process
for the selected native input.
This procedure enables the
Auto mode to switch back to Minimum Delay mode
— provided that the signal is within range. Please note:
~ The button only appears when the selected input is set to Auto mode.
~ In Auto: Minimum Delay mode, the button is grayed out.
~ In Auto: Frame Sync mode, the button is active.
In the
Tool Bar, the following adjustments are provided:
• Press {Info} to display the Input Color Legend Pop-up. Refer to the
“
Connector Colors” section on page 204 for details.
• Press {Freeze} to toggle the freeze “state” of the selected input.
~ Select On to freeze the input.
~ Select Off to un-freeze the input.
Name
EXT DSK Cut
Format
Native
EXT DSK Fill Native
Error Reporting
On
On
Sync Mode
Auto: Minimum Delay
Auto: Minimum Delay
Sync
Mode
Auto
Refresh
Sync
Info
Freeze
Off