Barco 26-0702000-00 Home Security System User Manual


 
FSN Series • User’s Guide • Rev 01 269
5. Menu Orientation
System Menu
pçÑíï~êÉ=q~ÄäÉ
The figure below illustrates a sample Software Table.
Figure 5-135. Software table (sample)
The Software Table lists the current versions of software in the FSN-1400 and control
panel. The following columns of information are provided:
Device — lists the system devices.
Status — provides status for the device (e.g., Connected, Not Connected,
Software Mis-match).
SW Version — lists the device’s software version.
pçÑíï~êÉ=cìåÅíáçåë
The following software functions are provided:
Press {Update Software} to install the latest version of FSN Series software in
the control panel. In Chapter 10, refer to the “
Updating Control Panel Software
section on page 429 for instructions.
Press {Update FSN-1400} to match FSN-1400 software to the control panel
software. In Chapter 10, refer to the “
Updating FSN-1400 Software” section on
page 430 for instructions.
The following two buttons are conditional. They only appear if a software mismatch occurs
in either the Touch Screen or the control panel’s flash memory. If there is no mismatch, the
buttons do not appear.
Press {Update Touch Screen} to update the software in the Touch Screen, if
required. In Chapter 10, refer to the “
Updating FSN-1400 Software” section on
page 430 for instructions.
Press {Update FSN-150 Flash} to update the control panel’s flash memory, if
required. In Chapter 10, refer to the “
Updating FSN-1400 Software” section on
page 430 for instructions.
Device Status
FSN-1400 Connected
System Status
FSN-150 Connected
SW Version
3.0
3.0
Note
When the message “Software Mismatch” appears on the
FSN-1400 line, you must update the FSN-1400 software.
Update
Software
Update
FSN-1400
Update
Touch
Screen
Update
FSN-150
Flash