Filter
Top Products
60 FSN Series • User’s Guide • Rev 01
2. FSN-1400 Orientation
Card Descriptions
k~íáîÉ=^ìñ=lìíéìí=`~êÇ
Card status: Optional
Installs in slots: 11, 12, 13
Default slot: 13
Maximum number of cards per chassis: 3
The NAC (Native Aux Output Card) is an optional card that provides eight additional
auxiliary outputs that run at the system’s native resolution. When NACs are installed, use
the Aux Setup Menu to map Aux outputs to the control panel, and name Aux outputs (if
desired). Refer to the “Card Slot Allocation and System Flexibility
” section on page 35
for details on NAC configurations.
The following additional features are provided on the NAC:
• Aux outputs switch to black on LOS (loss of signal). In Chapter 7, refer to the
“Understanding Error Messages
” section on page 316 for more details.
• Aux outputs preserve ancillary data from NIC inputs. In Chapter 1, refer to the
“New Feature Review
” section on page 27 for details.
• Test patterns can be assigned to any NAC output, and a raster box can be turned
on or off. In Chapter 5, see the “Output Test Patterns Menu
” section for details.
The figure below illustrates the NAC’s front edge and rear panel connectors:
Figure 2-12. NAC front edge and rear panel connectors
1) Ejectors
3) Loaded LED
2) Card Power LED 4) Native Aux Outputs
Power
Loaded
Native Aux Output Card
NAC
1
1
Front Edge Rear Panel
4
2 3
1
2
3
4
5
6
7
8
SDI