Filter
Top Products
284 FSN Series • User’s Guide • Rev 01
6. System Setup
Touch Screen Calibration
qçìÅÜ=pÅêÉÉå=`~äáÄê~íáçå
FSN Series system setup: Step 3.
The calibration procedure is an excellent starting point prior to performing a comprehensive
system setup.
S Prerequisite — Ensure that you are familiar with the Diagnostics Menu. In
Chapter 5, refer to the “
Diagnostics Menu” section on page 257.
Use the following steps to calibrate your Touch Screen:
1. In the Menu Bar, press {System} to access the System Menu.
2. Press {Diags} to display the Diagnostics Menu.
3. Press {Calibrate Touch Screen}, then follow the prompts on screen to perform
the calibration.
3
Tip
For a more accurate calibration, use a pencil eraser instead
of your finger tip.