Filter
Top Products
FSN Series • User’s Guide • Rev 01 87
3. Control Panel Orientation
Control Panel Descriptions
When pressed by themselves, MIX, WIPE and FX TRIG are mutually exclusive:
~ Press MIX to select a mix effect only.
~ Press WIPE to select a wipe effect only.
~ Press FX TRIG to select an effects trigger only. KEY 1 and/or KEY 2
must be enabled, and a two-keyframe effect must be loaded in the
selected keyer(s).
Two “combination” effects are also possible:
~ Simultaneously press MIX + FX TRIG to select a mix effect, and
simultaneously trigger a two-keyframe DVE effect.
~ Simultaneously press WIPE + FX TRIG to select a wipe effect, and
simultaneously trigger a two-keyframe DVE effect.
Again, with these combination effects, KEY 1 and/or KEY 2 must be enabled, and
a two-keyframe effect must be loaded in the selected keyer.
Following are detailed descriptions of each button in the Effects Group:
~ Press MIX to arm the M/E for a mix, using the layers enabled in the Next
Transition Group. The mix can be performed manually with the T-Bar
or automatically with AUTO TRAN.
Please note:
•A MIX can be performed with any combination of BG, KEY 1
and KEY 2.
•A MIX + FX TRIG can only be performed when KEY 1 and/or
KEY 2 is enabled, and the selected keyer has a two-keyframe
effect loaded.
~ Press WIPE to arm the M/E for a wipe transition, using the layers
enabled in the Next Transition Group. The wipe can be performed
manually with the T-Bar, or automatically using AUTO TRAN.
Please note:
•A WIPE can be performed with any combination of BG, KEY 1
and KEY 2.
•A WIPE + FX TRIG can only be performed when KEY 1 and/or
KEY 2 is enabled, and the selected keyer has a two-keyframe
effect loaded.
~ The FX TRIG (Effects Trigger) button enables you to run two-keyframe
DVE effects from the control panel — either individually, or in
combination with mix and wipe transitions. When a two-keyframe DVE
effect is triggered, it runs forward from keyframe 1 to 2, or backward from
MIX
Note
After a mix transition has been armed, press and hold MIX to
display the Transition Menu.
WIPE
Note
After a wipe transition has been armed, press and hold WIPE
to display the Wipe Menu.
FX
TRIG