Filter
Top Products
386 FSN Series • User’s Guide • Rev 01
8. DVE Operations
DVE Menu Orientation
• If Motion Adaptive de-interlacing is selected, press {Motion Threshold} to
adjust the threshold of the motion adaptive de-interlacer. Because adjustment is
rarely required, it is recommended that you leave the function at its default setting.
Note that this function is not available when keyframe 2 is selected.
• Press {Image Flip} to display the Image Flip Pop-up, which enables you to flip
the image within the PIP:
~ Select {Off} to turn off any image “flip” attributes. The image will be
displayed in its original orientation.
~ Select {H} to flip the image horizontally, along the Y axis.
~ Select {V} to flip the image vertically, along the X axis.
~ Select {H + V} to flip the image both horizontally and vertically, along the
X and Y axes.
• Press {Strobe} to toggle the strobe function on and off. When On, adjust the
{Strobe Rate} interval (in frames) to set the duration that the source is frozen until
the next grab.
The
KF Freeze and Run Freeze functions work together to control freeze behavior. Both
buttons can be set individually for keyframes 1 and 2, and the settings apply whether or not
the effect is running forwards or backwards.
• The {KF Freeze} function is a toggle that determines freeze behavior at each
keyframe boundary. When
On, the image is frozen. When Off, the image is live.
Refer to the “
Keyframe Freeze Behavior” section on page 387 for a detailed
table that explains how the two “freeze” buttons work together.
• The {Run Freeze} function is a toggle that determines freeze behavior while the
effect is running. When
On, the image is frozen as the effect runs from keyframe
to keyframe. When
Off, the image is live during the run. Refer to the “Keyframe
Freeze Behavior” section on page 387 for a detailed table.
Motion
Thres-
hold
Image
Flip
Off
Strobe
On
KF
Freeze
Off
Run
Freeze
Off