Filter
Top Products
FSN Series • User’s Guide • Rev 01 315
7. Operations
Understanding Tally
råÇÉêëí~åÇáåÖ=q~ääó
Buttons on the KEY, BG and PST buses obey the following rules with regard to tally:
• Backlight — All buttons in the bus rows are normally dim, at the selected
backlight level (as set on the
User Preferences Menu). When a button is
selected, it turns bright.
• Tally — PGM Bank
~ Selected buttons on PGM are bright red.
~ Selected buttons on PST are bright green.
~ Selected buttons on the phantom key bus are bright green when the
DSK is off, and bright red when the DSK is on.
~ During the transition interval of a MIX or WIPE, buttons on PST are bright
red. The source turns red the moment the
PST bus contributes to the
bank’s output, and stays red until the transition completes.
• Tally — M/E Bank (no re-entry into PGM)
~ Selected buttons on BG are bright coral.
~ Selected buttons on PST are bright green.
~ Selected buttons on the KEY bus are bright green when the key is off,
and bright coral when the key is
on.
~ During the transition interval of a MIX or WIPE, buttons on PST are bright
coral. The source turns coral the moment the
PST bus contributes to the
bank’s output, and stays coral until the transition completes.
• Tally — M/E Bank (re-entry into PGM)
~ Selected buttons on BG are red.
~ Selected buttons on PST are bright green.
~ Selected buttons on the KEY bus are bright green when the key is off,
and bright red when the selected key is
on.
~ During the transition interval of a MIX or WIPE, buttons on PST are bright
red. The source turns red the moment the
PST bus contributes to the
bank’s output, and stays red until the transition completes.
Note
The red LED above the DSK button (in the Next Transition
Group) turns bright when the DSK is on and contributing to
the bank’s output.
Note
For both re-entry and non re-entry conditions, the red LEDs
above the Key 1 and Key 2 buttons (in the
Next Transition
Group
) turn bright when keys are on, and contributing to the
bank’s output.