Filter
Top Products
FSN Series • User’s Guide • Rev 01 321
7. Operations
Understanding Lookahead Preview
bñ~ãéäÉ=OW==hbv=N=iççâ~ÜÉ~Ç
Use the following steps to learn how the KEY 1 button affects lookahead preview.
1. Press SEL to switch the key bus to KEY 1.
2. Select GFX on the key bus.
3. In the Next Transition Group, press KEY 1. This action arms the KEY 1 layer to
transition.
Figure 7-7. M/E Bank: KEY 1 lookahead
Please note:
~ With KEY 1 selected and BG turned off, KEY 1 will transition over the
current BG source. The PST bus will not transition.
~ The source selected on PST does not appear on PVW — because it’s
not part of the next transition.
~ The lookahead PVW output shows the KEY 1 source keyed over BG.
This is the perfect time to clip and adjust the key.
4. Press CUT or AUTO TRAN to cut, mix or wipe KEY 1 over the BG bus.
Preview Program
CAM1
CAM2
GFX
LOGO
BG
KEY
1
KEY
2
P
S
T
B
G
K
E
Y
BLACK
BLACK
BLACK
FSN
Series
Note
Once KEY 1 is pressed (and armed), press and hold KEY 1
to jump to the Keyer Menu for M/E 1, Key 1, where you can
clip and adjust the key on preview.