Filter
Top Products
FSN Series • User’s Guide • Rev 01 395
8. DVE Operations
Editing Keyframes
• The Shot Box KF field indicates the shot box keyframe currently applied to either
keyframe
1 or 2. If the associated field is blank, no shot box keyframe has been
applied, or the shot box effect (that was
previously applied) has been modified.
The two
DVE Run buttons control dual keyframe effects:
• Press the Forward (X) button to run the effect from keyframe 1 to 2.
• Press the Reverse (W) button to run the effect from keyframe 2 to 1.
You can use these two buttons to run effects on
PGM or PST. However, if you want to “see”
the keyframe that you are editing, you must “run” to it. For example:
S Keyframe 1 is on PST. To edit keyframe 2 and see the keyframe, press
Effect KF 2, then press X.
S Keyframe 1 is live on PGM. To edit keyframe 2 blind (essentially off air),
press
Effect KF 2 and edit the keyframe, or apply a pre-programmed shot
box effect. When ready, press
X to transition to the edited keyframe.