Filter
Top Products
42 FSN Series • User’s Guide • Rev 01
2. FSN-1400 Orientation
Hardware Description
~ UIC panels. Up to five panels can be installed in slots 3 through 7. Refer
to the “Universal Input Card” section on page 55 for details.
3) M/E Card Panel
Slot 8 is reserved for the required M/E card panel. Refer to the “M/E Card
”
section on page 49 for details.
4) DVE (Blank) Panel
Slots 9 and 10 are reserved for blank panels, as the DVE card does not require
any connectors. See the “Digital Video Effects Card
” section on page 57.
5) Aux and MVR Output Card Panels
Slots 11, 12 and 13 are reserved for three types of optional cards:
~ UOC (Universal Output Card). Up to three panels can be installed. See
the “Universal Output Card” section on page 58.
~ NAC (Native Aux Output Card). Up to three panels can be installed.
See the “Native Aux Output Card” section on page 60.
~ MVR (Multiviewer Card). One panel can be installed in slot 11 only. See
the “Multiviewer Card” section on page 62.
6) System Card Panel
Slot 14 is reserved for the System card panel. Refer to the “System Card
”
section on page 44 for details.
7) AC Power
The AC Power section provides two AC power connectors with integral switches.
One connector is provided for each supply, which allows the frame to be powered
from two different circuit breakers in a redundant configuration.
Note
The default FSN-1400 configuration has one power supply
installed in the lower slot. The bottom AC connector is used.
Important
Unused rear slots must have blank panels installed for
purposes of thermal management and EMI.