Filter
Top Products
FSN Series • User’s Guide • Rev 01 231
5. Menu Orientation
System Menu
• For interlaced native resolutions only, press {Freeze Mode} to display the Freeze
Mode Pop-up. The following options are available:
~ Field 1 — freezes the input on field 1.
~ Field 2 — freezes the input on field 2.
~ Frame — freezes an entire frame.
• Toggle the {Error Reporting} button to either On or Off:
~ When on, the label “On” appears in the table in the Error Reporting
column, and error reporting is active.
~ When off, the label “Off” appears in the table, and error reporting is
prevented.
• Press {Save Settings} to save the selected input’s setup parameters in non-
volatile memory.
• Press {Restore Saved Settings} to recall the selected input’s setup parameters
from non-volatile memory.
• Press {Restore Default Settings} to recall the selected input’s default setup
parameters.
aph=cáää=pÉíìé
To set up the DSK Fill input, touch its connector in the Rear I/O View. The menu changes
to display the input’s setup functions.
In the
Tool Bar and Sync section, all functions are identical to those for the DSK Cut
connector. Refer to the “
DSK Cut Setup” section on page 230 for details.
Freeze
Mode
Field 1
Note
The {Freeze Mode} button does not appear when a
progressive native resolution is set.
Error
Reporting
On
Save
Settings
Restore
Saved
Settings
Restore
Default
Settings