Filter
Top Products
FSN Series • User’s Guide • Rev 01 119
4. Installation
Card and Rear Panel Installation
5. Using the nylon guides in the chassis for alignment, carefully insert the card into
the chassis until both ejectors engage the rim of the card cage. Each ejector will
“automatically” angle towards the middle of the card.
Figure 4-12. Ejectors engaged in card cage rim
6. On each ejector, squeeze the two black handles together, then simultaneously
push both latches into the slot on the card’s front plate — until the card is fully
seated in the FSN-1400 chassis.
Figure 4-13. Final card insertion
Card
Card Cage Rim
Squeeze
together
Squeeze
together
Push,
latch and
release
Push,
latch and
release
Caution
Always push both latches simultaneously. If you only use one
latch, you can damage the card.