Barco 26-0702000-00 Home Security System User Manual


 
FSN Series • User’s Guide • Rev 01 339
7. Operations
Working with Memory Registers
The table below summarizes the functions you can perform in each mode:
píçêáåÖ=jÉãçêó=oÉÖáëíÉêë
When you store a memory register, you take a “snapshot” of the switcher and the selected
modules. Once stored, you can
not add data to that register — you can only overwrite it
with new data.
S If you store M/E 1 into register 100, you can not add AUX data into that
register. However, you could overwrite register 100 with new data.
Storing a memory register and bypassing the Enables is an easy equation. This method
stores the entire contents of the selected module(s).
STORE, [enable/disable modules], [select register #], ENTER
Storing a memory register and setting Enables is also an easy equation. This method
stores partial contents of the selected module(s).
STORE, [enable/disable modules], [select register #], [set Enables], ENTER
The following topics are discussed in this section:
Store, Bypass Enables, Use Default Name
Store, Bypass Enables, Enter Custom Name
Store, Set Enables, Enter Custom Name
Memory Store Notes
píçêÉI=_óé~ëë=bå~ÄäÉëI=rëÉ=aÉÑ~ìäí=k~ãÉ
Use the following steps to store a memory register, bypass the Enables menu, and use
the default register name:
1. Set up the switcher in the exact configuration that you want stored.
2. On the Keypad, press STORE. By default, all available modules light in the
keypad’s
Module Section.
3. Select the desired modules to include (or exclude) in the register. If you don’t take
any action, all modules remain enabled.
4. Enter the desired register number.
5. Press ENTER. The register is stored in memory with all Enables are on, and a
default description is assigned (
reg-#). Above the Keypad, the selected register
number and the default description “
reg-#” appear in the Memory Display,
adjacent to the prefix “
STR:
Table 7-3. Memory Menu modes and functions
Memory Menu
Mode
Name
Registers
Modules Enables
Lock
Registers
Delete
Registers
View Yes View Only View Only Yes Yes
Store Yes Modify Modify No No
Recall No Modify Modify No No