Filter
Top Products
FSN Series • User’s Guide • Rev 01 413
9. Multiviewer Operations
Introduction to the Multiviewer
• UMD text — the text that appears in the UMD can be changed or modified as
desired, up to an eight character limit.
• Clock — when a Multiviewer layout includes a clock, the following clock features
are available:
~ The clock source can be set to internal or LTC.
~ The display mode can be set to 12 or 24 hour mode.
~ The time can be set on the User Preferences Menu.
• Error indications — the following error indications are provided:
~ PIP border color will turn RED upon loss of signal (LOS). When the error
is resolved, the border returns to the current color as set on the
Multiviewer Setup Menu.
• Freeze indications — the following freeze indications are provided:
~ PIP border color will turn CYAN when the selected source is frozen.
When the source is un-frozen, the border returns to the current color as
set on the
Multiviewer Setup Menu.