Filter
Top Products
FSN Series • User’s Guide • Rev 01 93
3. Control Panel Orientation
Control Panel Descriptions
`ìëíçã=`çåíêçä=pÉÅíáçå
The Custom Control Section provides groups of buttons that can be programmed to
perform various switcher functions such as accessing menus, running macros, running
“system” functions and triggering GPOs. Pre-programmed functions are also provided.
On the FSN-150, eight custom buttons are provided (two groups of four). The figure below
illustrates the Custom Control Section on the FSN-150:
Figure 3-20. Custom Control Section, FSN-150 (sample)
Following are descriptions of each section:
1) Custom Control Displays
One Custom Control Display is provided for each group of four Custom Control
buttons. Each LCD display provides two lines of 20 characters each, enabling
each button to be labeled with two lines of four characters.
2) Custom Control Buttons
Each individual Custom Control Button represents a pre-programmed or
programmable function that you can trigger, such as a GPO or a macro. To trigger
the function, press the button, which lights momentarily to confirm.
3) USB Port
Use the USB Port to connect a customer-supplied USB thumb drive, for system
functions such as backup, restore, and updating software.
Please note the following important points regarding the Custom Control Section:
• Additional USB ports are available on the rear of the control panel. Refer to the
“Control Panel Rear
” section on page 99 for details.
F R Z U N A L L
F R Z T R A N
A L L M / E 2 S A V E
C U T C T R L A L L
FSN-150
2
1 3
1) Custom Control Displays 2) Custom Control Buttons 3) USB Port
Note
Full Custom Control functionality is not available in version
3.0. Only pre-programmed functions such as ALL TRAN,
FRZ and UNFRZ are available. In Chapter 7, refer to the
“Using Custom Control Functions
” section for details.