Filter
Top Products
402 FSN Series • User’s Guide • Rev 01
8. DVE Operations
Automatic DVE Triggering
qêáÖÖÉê=~å=bÑÑÉÅí=çå=hÉóÉê=O=låäó
Use the following steps to trigger a DVE effect on Keyer 2 only:
1. In the Next Transition Group, press KEY 2.
2. In the Effects Group, press FX TRIG. The label “FX” appears in the Transition
Display
above KEY 2, indicating that the DVE effect is armed.
3. Press AUTO TRAN to run the effect forward or backward.
4. To cancel the trigger, press MIX or WIPE.
Figure 8-25. Trigger DVE effect on Keyer 2
qêáÖÖÉê=bÑÑÉÅíë=çå=ÄçíÜ=hÉóÉêë
Use the following steps to trigger DVE effects on keyers 1 and 2:
1. In the Next Transition Group, simultaneously press KEY 1 and KEY 2.
2. In the Effects Group, press FX TRIG. The label “FX” appears in the Transition
Display
above KEY 1 and KEY 2, indicating that both effects are armed.
Figure 8-26. Trigger DVE effects on Keyers 1 and 2
3. Press AUTO TRAN to run the effects forward or backward.
4. To cancel the triggers, press MIX or WIPE.
BG
KEY
1
KEY
2
MIX WIPE
FX
TRIG
M E M K E Y 1 T R A N
2 1 C A M 1 G F X 2 3 0
F X
Important
If KEY 2 is not enabled on Program (with the red LED lit), you
will not see the PIP flight occur, either on Preview or Program.
BG
KEY
1
KEY
2
MIX WIPE
FX
TRIG
M E M T R A N
2 1 C A M 1 G F X 2 3 0
F X F X
Important
If KEY 1 and KEY 2 are not enabled on Program (with the red
LEDs lit), you will not see the PIP flight occur.