Filter
Top Products
Appendix - 12
Appendices
Buffer memory address Compatibility
of setting value
of QD77MS2/
QD77MS4 and
QD77MS16
Item
Memory
area
QD77MS2
QD77MS4
QD77MS16
30100+10n
[Cd.180] Axis stop
Expansion axis
control data
Control data
30101+10n
[Cd.181] Forward run JOG start
30102+10n
[Cd.182] Reverse run JOG start
30103+10n
[Cd.183] Execution prohibition flag
2000+6000n
6000+1000n
[Da.1] Operation pattern
Positioning
identifier
No.1
Positioning data
Positioning data
[Da.2] Control system
[Da.3] Acceleration time No.
[Da.4] Deceleration time No.
[Da.5] Axis to be interpolated
2001+6000n 6001+1000n
[Da.10] M code/condition data No. /Number of LOOP to
LEND repetitions
2002+6000n 6002+1000n
[Da.9] Dwell time/JUMP destination positioning data No.
6003+1000n
[Da.20] Axis to be interpolated No.1
Axis to be
interpolated
[Da.21] Axis to be interpolated No.2
[Da.22] Axis to be interpolated No.3
2004+6000n
2005+6000n
6004+1000n
6005+1000n
[Da.8] Command speed
2006+6000n
2007+6000n
6006+1000n
6007+1000n
[Da.6] Positioning address/movement amount
2008+6000n
2009+6000n
6008+1000n
6009+1000n
[Da.7] Arc address
2010+6000n
to
2019+6000n
6010+1000n
to
6019+1000n
No.2
2020+6000n
to
2029+6000n
6020+1000n
to
6029+1000n
No.3
to to to
to
2990+6000n
to
2999+6000n
6990+1000n
to
6999+1000n
No.100
3000+6000n
to
3009+6000n
Set with
GX Works2
No.101
to to
to
7990+6000n
to
7999+6000n
No.600
n: Axis No.-1
: Compatible : Partly compatible : Not compatible