Filter
Top Products
Appendix - 30
Appendices
CAUTION
Please use the processing method and the processing treatment device that exists in the connector
when you fix the cord part of the SSCNET
cable to the connector.
It must not cut squarely when you cut the cord part of the SSCNET cable, the cutting edge side must
not be made smooth, and garbage etc. must not adhere.
The damage etc. must not adhere to the optical cord part when you peel off the film of the cable of the
SSCNET
cable.
If the end face of cord tip for the SSCNET cable is dirty, optical transmission is interrupted and it may
cause malfunctions. If it becomes dirty, wipe with a bonded textile, etc. Do not use solvent such as
alcohol.
Do not add impossible power to the connector of the SSCNET cable.
When incinerating the SSCNET cable (optical fiber), hydrogen fluoride gas or hydrogen chloride gas
which is corrosive and harmful may be generated. For disposal of the SSCNET
cable (optical fiber),
request for specialized industrial waste disposal services who has incineration facility for disposing
hydrogen fluoride gas or hydrogen chloride gas.