Filter
Top Products
A - 22
COMPLIANCE WITH THE EMC AND LOW VOLTAGE DIRECTIVES
(1) For programmable controller system
To configure a system meeting the requirements of the EMC and Low Voltage
Directives when incorporating the Mitsubishi programmable controller (EMC and
Low Voltage Directives compliant) into other machinery or equipment, refer to the
Safety Guidelines provided with the main base unit. Also, refer to "Example of
measure against noise for compliance with the EMC directive" of the Section
4.3.1 of this manual.
The CE mark on the side of the programmable controller indicates compliance
with EMC and Low Voltage Directives.
(2) For the product
To make this product comply with EMC and Low Voltage Directives, refer to
Section 4.3.1 "Precautions for wiring".
RELEVANT MANUALS
(1) Simple Motion module
Manual Name
<Manual number (model code)>
Description
MELSEC-Q QD77MS Simple Motion Module User's Manual
(Positioning Control)
<IB-0300185, 1XB947>
Specifications of the QD77MS and information on how to
establish a system, maintenance and inspection, and
troubleshooting
Functions, programming and buffer memory for the
positioning control of the QD77MS
MELSEC-Q/L QD77MS/QD77GF/LD77MS/LD77MH Simple
Motion Module User's Manual (Synchronous Control)
<IB-0300174, 1XB943>
Functions, programming and buffer memory for the
synchronous control of the Simple Motion module
(2) CPU module
Manual Name
<Manual number (model code)>
Description
QCPU User's Manual
(Hardware Design, Maintenance and Inspection)
<SH-080483ENG, 13JR73>
Specifications of the hardware (CPU modules, power supply
modules, base units, batteries, and memory cards), system
maintenance and inspection, and troubleshooting
QnUCPU User's Manual
(Function Explanation, Program Fundamentals)
<SH-080807ENG, 13JZ27>
Functions, devices, and programming of the CPU module
Qn(H)/QnPH/QnPRHCPU User's Manual
(Function Explanation, Program Fundamentals)
<SH-080808ENG, 13JZ28>
Functions, devices, and programming of the CPU module