Filter
Top Products
5 - 159
Chapter 5 Data Used for Positioning Control
Setting value
Default
value
Buffer memory address
(common for all axes)
QD77MS2
QD77MS4
QD77MS16
Set with a decimal.
Setting
value
K
Flash ROM write request
1: Requests write access to flash ROM.
The Simple Motion module resets the value to "0" automatically when
the write access completes.
(This indicates the completion of write operation.)
1
0 1900 5900
Set with a decimal.
Setting
value
K
Parameter initialization request
1: Requests parameter initialization.
The Simple Motion module resets the value to "0" automatically
when the initialization completes.
(This indicates the completion of parameter initialization.)
1
0 1901 5901