
91
Deleting block settings
Follow these steps to delete block settings for a group.
[Procedure]
1) Click the group icon.
Select the group icon whose block settings you wish to delete by clicking on its icon.
2) Click [Release] button.
Select the [Release] button and the block settings for the selected group are erased. The “Block**”
label in the group icon disappears.
Changing the block name
Follow these steps to change the name of the selected
block.
[Procedure]
1) Click [Name change] button.
Click the [Name change] button in the Operation block
setting screen.
2) Select the block name.
Select the name of the block to change. The selected
block appears in the selected block cell.
3) Enter a new name.
Enter the new block name. Subsequently, enter the
other new block names ( 2) to 3) ).
4) Click [OK] button after entering the block name.
After entering the block name, click the [OK] button. The block name is monitored.
OK : Accept the new block name.
Cancel : Delete any changes and restore the earlier block name.
Note:
• If a named block has no groups assigned to it, a message appears asking if it is okay to delete the
block itself. To delete the block itself, click the [OK] button; to keep the block, click the [Cancel] button.
Block name change screen