Filter
Top Products
120
8.18 Night Mode Set-up
8.18.1 Setting Procedure and Restrictions
Confirm the precautions before setting or changing
the night mode function.
Prepare to set the night mode
[Procedure]
1) Select the [Night mode set-up] button.
Click the [Night mode set-up] button located in the
system setting group on the initial window.
2) Select the [OK] button after confirming the display
contents.
Check the contents of the alarm displayed and
click the [OK] button.
* When the [Cancel] button is clicked, this setting is terminated to return to the initial screen.
Execute the Night mode set-up in accordance with the following procedure.
Step 1: Night mode set-up
Night mode set-up screen
8.18.2 Night Mode Set-up (Step 1)
Monitor the night mode setting details set in AG-150A/G-50A.
[Procedure]
1) Click the [Monitor] button or [All monitors] button.
If the night mode has already been set, the setting details will appear.
Set the AG-150A/G-50A subject to the night mode control.
[Procedure]
1) Use the “
/
” button to select the AG-150A/G-50A No.
Click the “
/
” button to select the G-50A subject to the night mode control.
Set the outdoor unit for using the night mode function.
[Procedure]
1) Click and select the icon of the outdoor unit to be set.
Click and select the icon of the outdoor unit to be set.
The selected outdoor unit's icon will appear in a red frame.
2) Set the time to start and end the night mode.
Click the “
/
” buttons to select the time to start and end the night mode.
The time can be set in the range of "0 hours 0 minutes to 23 hours 59 minutes".
Finish the night mode set-up.
[Procedure]
1) Click the [OK] button.
Click the [OK] button when finished with the settings.
Note:
• If the start time and end time are the same, the night mode will be applied for 24 hours.
• Some outdoor units do not have the night mode function.
Night mode set-up preparation screen
Monitor from all AG-150A/G-50A
Use this to monitor the set-up status from all
connected G-50A units.
Monitor from AG-150A/G-50A
Use this to monitor the set-up status from
the selected AG-150A/G-50A.
AG-150A/G-50A
selection field
Select the AG-150A/G-50A
to be set.
Start/End time setting field
Set the time to start and end the night mode.
Target outdoor unit selection field
Select the outdoor unit to be controlled with
the night mode.