Filter
Top Products
78
8.9.7 General equipment setting (Step 6)
Set the general equipment's address, functions and name
[Procedure]
1) Select the PLC No. by clicking the “
” button.
Select the PLC No. to be used by clicking the “
”
button.
* PLC refers to the programmable logic controller.
2) Click the box in the selection field.
: Selected
: Not selected
* Use only general equipment No. 1**-1 to 32.
3) Set the name, functions and display details.
Set the following items on the General equipment Details Set-up window.
Device name (short name, full name)
Operation setting (operation, schedule)
Operation display (display characters, monitor selection)
Error and warning status display (display characters, color selection)
General equipment Set-up screen
PLC No.
selection
Select the PLC.
Number of
connected PLCs
The number of PLC units
connected is displayed.
Number of set general
equipments
The number of set general
equipments is displayed.
General
equipment
button
Set the general
equipment. The menu
contains Change, Copy
and Paste.
Select button
Select the presence of
general equipments.
: Selected (present)
: Not selected
(absent)
* No. 1**-033 or higher
cannot be selected.
Function display
The functions for the set
general equipment are
displayed.
General equipment Set-up screen
General
equipment
address
Displays the general
equi
pment
'
s address.
Device name
setting
Sets the general
equipment's name
(short name, full
name)。
Operation setting
Sets the functions for
the general
equipment's
operation setting.
• Operation
• Schedule
Error and
warning status
display setting
Set the validity of the
general equipment's
error display, and the
display characters.
* Only error display
No. 1 can be used.
General equipment Details Set-up screen
OK button
Click on the [OK] button
after setting the general
equipment functions.
Setting the use of
previous version icon
Set the use of the previous icon on
the administration screen.