Filter
Top Products
81
8.10.2 General Equipment Set-up (Step 1)
General equipment set-up screen
Set the general equipment address, function and name.
[Procedure]
1) Click on the box in the selection field.
: Selected
: Not selected
* The number of general equipment units that can
be set differs according to the number of G-50A
units. The maximum number is 2000 units.
General equipment details setting screen
2) Set the name.
Set the full name and short name at the General
Equipment Name setting.
General
equipment
button
The general
equipment can be
set. The menu
includes Change,
Copy and Paste.
Selection
button
Select whether the
general equipment
is present.
: Selected
(Present)
: Not selected
(Not present)
Jump button
When clicked on
after inputting the
general equipment
No. (1 to 2000),
the line will jump to
that No.
No. of set
general
equipment
units
Display the No.
of set general
equipment units.
Function
display
Display the
set general
equipment
functions.
General Equipment
number
The general equipment
number is displayed.
General Equipment
Name setting
Set the general equipment
name (short name, full
name).
Input-and-output
setup
Set the input/output
contact to be used.
A
lso set the display
characters and display
color.
Select button
Click to set the
contact No.
OK button
Click the [OK] button
after setting the
general equipment
functions.
Note:
• When PLC for general equipment (Ver.2 or later) is not connected, this function cannot be used.