Filter
Top Products
210
2. Backing up the system setting data in the “Wide area” mode
[Procedure]
1) Quit the integrated software “Wide area TG-2000A” program.
Exit “Wide area TG-2000A” using the “Site change tool.”
2) Exit the “Site change tool.”
Quit the “Site change tool” itself.
3) Copy and paste database.
Copy the files in the folders below, and paste them on to a removable disc.
Folder location: C:¥program files¥tg2000¥ (site name)
*Floor screen and sub screen are stored in the folder above.
Screen Folder
Floor screen C:¥TgsiteData¥tg2000¥(site name)¥Floor
Sub screen C:¥TgsiteData¥tg2000¥(site name)¥Floor
4) Start up the “site change tool.”
Click the icon for the program on the desktop to start up “Site change tool.”
5) Start up “Wide area” TG-2000A.
Select the site to be connected to from the “site change tool,” and start up TG-2000A.
3. Backing up the system setting data using the backup tool
[Procedure]
1) Quit the integrated software TG-2000A program.
Quit the integrated software program after initialization and test run.
* The database file cannot be copied if the integrated software is running.
2) Start up “DbBkup Tool.”
Start up [DbBkupTool.exe] in the TG-2000A installation folder.
3) Designate the storage location and enter the file name.
Designate an arbitrary storage location, and enter the file name.
Press the [Save] button to output the backup data.
Note
• If sub folders are used to organize files, the folder name will be included in the “site name.”
• Make a backup without the ”Wide area TG-2000A” and “The site change tool” being run.
Note
• DbBkupTool cannot be started up unless it is located in the TG-2000A installation folder.
• The following data will be backed up:
Database (MJ310G.***，MJ310GT.***)
Plane view for floor
User icon
• When using the backup mode, files under a folder are excluded from the backup target in the
Wide Area mode.
When using the Wide Area mode, refer to the section “Backing up the system setting data in the Wid
e
Area mode” for how to back up the data.
CAUTION
• Note that the data storage folder for the Wide Area mode has been changed.
On the Ver. 5.10 or earlier, the location of the data storage folder is as follows:
C:¥program files¥tg2000¥(site name)