Filter
Top Products
39
2) Select [OK] button.
Click the [OK] button to transmit all settings to the
AG-150A/G-50A.
* Click the [Cancel] button to return to the Initial window.
The start-up display screen is displayed after the
screen has been shifted to the control window.
The system information set or changed is
transmitted to each AG-150A/G-50A to enter upon the start-up processing.
It takes approximately 5 to 20 minutes
to start-up.
(2) Shift from the control window to the initial window
The control window shifts to the initial window when
the initial setting contents are changed or when the
charge calculation maintenance is performed.
[Procedure]
1) Select [Configuration] and then [System set] in the
menu bar.
Click the [Configuration] in the menu bar on the
control window to select the [System set]. The
password confirmation screen is displayed.
2) Enter the password
Enter the word “*****” in the password verification
box, then click the [OK] button. Doing so returns you
to the initial window.
There are 3 kinds of passwords.
Initialization password : All the items in the initial
window can be used.
The initial password is
“SYSTEM”.
Maintenance password : The initial window maintenance group and personal password can be
changed. This is also used as the password for "Charge set" on the
control window. The initial password is “Maintenance”.
For finishing TG-2000A on the management screen:
It is used to quit TG-2000A from the management screen.
The initial password is “tglogout”.
Maintenance Tip
• Manage the password to prevent unauthorized personnel from accessing the system. The
password can be changed.
Display screen of Shift to setting screen
Confirmation screen for all setting transmission
Password input screen