Filter
Top Products
137
<Output file data format>
The data format is CSV format. Data is output in ascending order.
A sample that uses Excel to fetch an output file is shown here.
<Automatic charge parameter output>
If the automatic charge parameter output function is enabled on the User setting window, the charge
parameter will be automatically output. The file will be stored in the folder that is automatically
created with a name that consists of the name of the folder that is selected as the destination file on
the User setting and ¥yyyy¥mm¥, which indicates the year and the month.
9.5 Charging Remedy
9.5.1 Remedial apportioning setting screen (RS-485)
(1) Check the items necessary for remedial apportioning.
When charging is not apportioned, the charging data is destroyed, etc., the air-conditioning charge
can be calculated by a simple method.
The items which must be set depend on the assumed case and the charging configuration. The table below
shows which setting items are required and are not required.
Assumed case
Charging
configuration
Settlement-
of-accounts
term
Total air-
conditioning
charge
Standard
charge
Remedial
apportioning
interval
Power
integrated
Value
Remark
1 system V V *1 V V
HDD failure
(no backup)
Multiple systems V V V *1 V V
Refer to
section
9.5.2
1 system V V *1 V
HDD failure
(backup)
Multiple systems V V V *1 V
Refer to
section
9.5.3
1 system V V *1 V
Computer crash
Multiple systems V V V *1 V
Refer to
section
9.5.4
1 system V V *1 V V *2
Watt hour meter
failure (Monitoring
impossible)
Multiple systems V V V *1 V V *2
Refer to
section
9.5.5
1 system V V *1 V V *2
System information
setting error
Multiple systems V V V *1 V V *2
Refer to
section
9.5.6
Note:
• When there is only one
charge unit, it will basically
be used as the charge unit
1, and the other charge unit
values will not increment.
(When using charge unit 1)
• When the integrated value
does not exist, “-99” is set
or the integrated value is
left blank.
Output file Excel fetch screen (sample)
C
harge parameter to be output
M
anual output: Outputs the data for the selected period
A
utomatic output (Monthly output): Outputs the data for the period from the last
m
onth’s cutoff date to this month’s cutoff date.
A
utomatic output (Daily output): Outputs only the data for the previous day
V shows that the item must be set.