Filter
Top Products
84
Removing a Model Name
[Procedure]
1) Select the unit to be removed.
Click the unit whose Model Name you wish to
remove. The cell is displayed
in cyan, and becomes the Model Name setting
objective. Multiple units can be selected.
2) Click the [Delete] button.
Click the [Delete] button. The Model Name of
the selected unit is deleted.
Frequency setting
[Procedure]
1) Select the frequency.
Select the working frequency with the power
frequency selection.
50Hz: Power frequency 50Hz (default)
60Hz: Power frequency 60Hz
Ending unit Model Name setup
[Procedure]
1) Select the [OK] button.
After fully completing the type name setting of the AG-150A/G-50A unit, click the [OK] button on the
setting screen.
*When the [Cancel] button is clicked, this setting is terminated to return to the initial window.
8.11.3 Set-up of the number of floors, and floor name (for sub screen) (Step 2)
Follow these steps to set the number of floors
being managed and floor names.
Set the number of floors and floor names.
[Procedure]
1) Click the “
/
” button to select the number of
floors
Clicking “
/
” button selects the number of floors.
2) Click in the Floor name cell. Enter a name for each
floor.
Click the floor name cell to be set. The cell is now
ready to receive text.
Now enter the name of the floor. Do this for each
floor.
3) Click [OK] button.
When finished with these settings, click the [OK]
button.
* When the [Cancel] button is clicked, this setting is
terminated to return to the initial windows.
Note:
• The minimum number of floors is 1, the maximum is 99
• Floor names can be a maximum of 16 characters.
(Duplicate settings are possible. Single quotations ['] cannot be used.)
Note:
• The Model Name can be manually entered at Model Name candidate.
Single quotations [ ' ] cannot be used.
• The KIC and AIC type is not a database. Enter it manually.
• A remote controller or system controller Model Name cannot be set.
• When the charge function was used and the Model Name was changed, check the charge
settin
g
set contents. The ca
p
acit
y
value of each unit is chan
g
ed.
Frequency check bo
x
Delete button
Floor
name
Floor
Set-up of the number of floors, and floor nam
e