Filter
Top Products
144
1) Computer down time check
Check the time the computer was shut down at the “Charging data maintenance” screen. When
nothing exists in the charging data, the numbers are displayed in gray.
2) Operation amount backup monitoring
Monitor backup of the operation amount from the day the computer crashed to the day it was
recovered. Set the start day as the computer crash day and the end day as the day before recovery
day.
3) Start remedial apportioning.
Start remedial apportioning by clicking the [Remedial apportioning] button in the initial window.
4) Settlement-of-accounts term setting
Set the settlement-of-accounts term (start day and end
day) at the remedial apportioning setting screen. The
initial value is the settlement-of-accounts term of the
previous month.
5) Total air-conditioning charge setting
Set the settlement-of-accounts term total air-conditioning
charge.
6) Include/Not include standard charge setting
When the settlement-of-accounts term is one month, [Include] or [Not include] standard charge can
be selected. Set whether or not the standard charge is to be included.
7) Remedial interval setting
Set the apportioning interval. The apportioning start day is the computer crash day and the
apportioning end day is the recovery day.
8) Watt hour meter integrated value setting
The value at 24:00 hours of the day before the computer crashed is displayed in the watt hour
meter integrated value of each watt hour meter. The watt hour meter integrated value does not
have to be corrected.
When setting of the remedial apportioning screen is complete, perform Section 9.5.1 “(3)
Calculate remedial apportioning”.
Note:
• Begin remedial apportioning from the day after the settlement-of-accounts day. However,
except when it is different from the normal settlement-of-accounts term. Remedial apportioning
can begin two days after the recovery day. (Only when the day after the recovery day was
normally charged.)
Note:
• When the charge for the day before the apportioning start day is not apportioned normally,
change the apportioning start day to the day after the first day charged normally before the
computer crashed.
Note:
• When a value is not displayed in the watt hour meter integrated value field, there is no data in
the database. Since there may be a setting error, check the remedial start day.
• The charge for the day before the computer crashed must be apportioned normally.
Note:
• Operation amount backup monitoring can be performed for the recovery day also.
Remedial apportioning setting screen
Note:
• When the settlement-of-accounts term is one month and includes a standard charge, set the
total air-conditioning charge including that standard charge.
• When there is one power charge, the total air-conditioning charge does not have to be set. This
item cannot be set.