Filter
Top Products
53
8.3.3 Connection Setting
Set whether each device is connected on the User setting 2 window.
Connection settings
Setting connector options
[Procedure]
1) Click the option buttons
Use the option button to select the printer and WHM connection.
Available printer options are ON or OFF.
The validity of the billing settings and energy saving functions are reflected with the watt hour
meter/meter settings.
Item Set value Details
Off (No connection)
(Default)
Turns the printing function off.
Printer connection
On (Connection) Turns the printing function on.
OFF (No connection)
(Default)
The watt hour meter/measurement meter cannot be
connected.
PI controller (MCP)
The watt hour meter/measurement meter can be
connected with an PI controller.
PLC
The measurement meter can be connected with a
PLC connection.
WHM/Measure-
ment meter
connection
Serial
The watt hour meter can be connected with an
RS-485 connection.
OFF (No connection)
(Default)
The general equipment cannot be connected.
PLC for General
Equipment
ON (Connection) The general equipment can be connected.
Note:
• Data cannot be printed if this option is OFF.
• Install the printer driver and confirm that printing is possible beforehand.
Note:
• When Windows(OS) is used continuously without restarting, system errors may accumulate. Thus
it is necessary to restart both TG-2000A and the Windows(OS).
• The automatic restart function serves to insure that the system restart is done on a regular basis.
If there is an error during the automatic restart, the system must be restarted manually. Since
there is a possibility of the error not being detected, it is recommended to periodically restart the
system manually.
• When automatic reboot is set to [ON], Windows reboots automatically at 06:35 on the 7th to 31st
day after booting. (The number of days depends on the set value.)
• The system configuration, history, and charge data databases are backed up. The trend and
dis
p
la
y
characters databases are not backed u
p
.