Filter
Top Products
34
Step 4) TG-2000A version upgrade
Upgrade this TG-2000A application version. Read the on-screen instructions carefully, and
proceed with the setup.
* The procedures are the same as the new setup.
(1) Start up the version upgrade setup program.
1) Starting SetupTG.exe
Execute ¥WindowsXP¥Verup¥TGVerup¥SetupTG.exe
from the CD- ROM.
2) Check the displayed items and click the [Next] button.
(2) Read the license agreement
1) Check the displayed items and click the [Next] button.
(3) Check the installation folder
1) Check the installation folder, and then click the [Next] button.
(4) Check the start of installation
1) Check that the installation has started, and then select the [Next] button.
(5) Check the completion of TG-2000A setup
1) Select the [Finish] button.
2) Restart the computer.
When starting up TG-2000A, a popup window will appear,
asking if you want to block the program.
Click [Unblock] to exclude the program from the Firewall.
*If the program has already been excluded from the Firewall at the previous
setup, this window will not appear.
*If the popup window becomes hidden behind the TG-2000A window, press
[Alt] and [Tab] simultaneously to bring up the window on the right,
and select Windows Firewall.
Note:
• Refer to step 3 in section 5.3.2 for details on the TG-2000A version upgrade procedures.
Note:
• Be sure to restart the computer
after installing the TG-2000A.
• Check all of the settings, such as the user settings and charging system configuration, etc., on the
initial screen, and set if necessary.
Windows Securit
y
Alert