Filter
Top Products
41
Wizard name Primary settings contained in the activated window Reference page
User Set-up Set TG-2000A functions 50
Wizard name Primary settings contained in the activated window Reference page
Site Name Set-up Set the product name (site name) 61
Wizard name Primary settings contained in the activated window Reference page
Password change Changes the password to the 3 types of Initial window 61
Wizard name Primary settings contained in the activated window Reference page
Preparation for the AG-150A/
G-50A connection setting
Checks the step/caution display for the AG-150A/G-50A connection
setting.
62
Number of AG-150A/G-50A units
setting
Sets the number of AG-150A/G-50A units. 62
AG-150A/G-50A IP address
setting
Sets the IP address for each AG-150A/G-50A.
It is possible to display the optional functions of the AG-150A/G-50A.
62
Wizard name Primary settings contained in the activated window Reference page
Preparation for System
configurations setup
Verifies the order of system configuration settings and displays
warnings
64
Collecting AG-150A/G-50A data Collects the setting information for the AG-150A/G-50A during the
initial setting.
64
Unit configurations setup Sets the unit configurations in AG-150A/G-50A. 65
System structure of refrigerant
system
Set refrigerant connections. 68
Function of each group Set indoor unit and ventilation groups. 69
Ventilation unit grouping Set ventilators and indoor unit groupings. 69
Wizard name Primary settings contained in the activated window Reference page
Preparation for DIDO,AI,PI
controller set-up
Set-up procedure and warning display for DIDO, AI and PI controller
can be confirmed.
72
DIDO controller set-up The information of group name, operation category, display and etc.
for DIDO controller can be confirmed and saved
72
AI controller set-up Name, measuring range, warning information and etc. for AI controller
can be confirmed and saved.
73
PI controller set-up The information of name, placement location, unit, pulse and etc. for PI
controller can be confirmed and saved.
74
Wizard name Primary settings contained in the activated window Reference page
Preparation for PLC for general
equipment setting
Verifies the PLC for general equipment setting steps and displays
warnings
75
Number of PLC units Sets the number of PLC units. 75
PLC setting and initial setting Sets the IP address and initial state for each PLC. 76
Functional setting Sets the function used with each PLC. 77
Advanced setting (air conditioner
status monitor setting)
Sets the AG-150A/G-50A to be monitored with each PLC. Sets this
when using interlocking control with air conditioners or the IC I/O
signal.
77
Advanced setting (peak cut
function setting) *
Sets the AG-150A/G-50A for peak cut operation with each PLC. Sets
this when the demand controller is connected to the PLC for general
equipment.
77
General equipment setting Selects the general equipment's functions and sets the name,
installation site and display details.
78
* This version is not compatible with the peak cut function.
Wizard name Primary settings contained in the activated window Reference page
Preparation of IC I/O signal
setting
Confirm the displayed steps and precautions for the IC I/O signal
setting.
80
General equipment setting Set the general equipment name, contact No. and display details. 81
Option functions
Option functions
Option functions