Filter
Top Products
221
3. Billing system of K-control
3-1 When using IC power supply and OC power supply separately (K-control building MULTI and K-control
Slim)
When the billing for the indoor unit and the auxililary heater for indoor unit are not charged, or it is collected
separately, WHM for KIC is not necessary.
<Necessary setups>
Menu Item Setting Note
User setting 2
WHM/Measurement
meter connection
Energy monitoring
function
Charge for A/K control
unit
Other than no connection
Activate
Activate
-
AG-150A/G-50A
connection set-up
AG-150A/G-50A
setup
Set according to the system.
-
System configuration
set-up
Unit composition set-up
Set-up of group
No setup is required for
KOC.
-
Measurement meter
set-up
PLC and Measurement
Meter Set-up
Set according to the system.
-
Energy monitoring
set-up
Division mode
Relation between OC
and WHM
OC setting
Relation between IC
and WHM
IC setting
Charge Blocks
Set according to the system.
When multiple KIC are
connected to KOC, set
the crankcase heater
on only the KIC whose
address is the smallest.
Charge setup
Charge time zone
setup
Set according to the system. -
・Make other settings if necessary.
・License registration of electricity apportioning billing function must be made on AG-150A/G-50A.
WHM
for KOC
KIC1
KIC2
WHM
for KIC