Filter
Top Products
222
3-2 When using OC power supply for IC (K-control Slim)
<Necessary setups>
Menu Item Setting Note
User setting 2
WHM/Measurement
meter connection
Energy monitoring
function
Charge for A/K control
unit
Other than no
connection
Activate
Activate
-
AG-150A/G-50A
connection set-up
AG-150A/G-50A
setup
- -
System configuration
set-up
Unit composition set-up
Set-up of group
No setup is required for
KOC.
-
Measurement meter
set-up
PLC and Measurement
Meter Set-up
Set according to the
system.
-
Energy monitoring
set-up
Division mode
Relation between OC
and WHM
OC setting
IC setting
Charge Blocks
Set according to the
system.
When multiple KIC are
connected to KOC, set the
crankcase heater capacity
on only the KIC whose
address is the smallest.
No setup is required for
power input and auxililary
heater.
Charge setup
Charge time zone setup Set according to the
system.
-
・Make other settings if necessary.
・License registration of electricity apportioning billing function must be made on AG-150A/G-50A
WHM
for KOC
KIC1
KIC2 KIC3