Filter
Top Products
52
Reliability Function Settings
window
8.3.2 Reliability Function
Turn on and off the automatic reboot function as backup and the database backup function.
Setting automatic reboot and database backup function
[Procedure]
Automatic reboot setting
1) Click the option button
Use the option button to select the Automatic Reboot function.
Automatic reboot setting
Do not automatically reboot：Does not automatically reboot.
(Default)
Automatically reboot(Days) ：Automatically reboots on
the selected day
Automatically reboot(Weekly) ：Automatically reboots on
the selected day of a week
2) Select the reboot interval using the “
/
” buttons.
When automatic reboot was set to On, select the automatic
reboot day using the “
/
” buttons. The setting range is the 7th
thru 31st day after booting. The initial value is the 31st day.
3）Automatically reboots by Weekly specification
When “Weekly automatic reboot” was set to On, select the day of a week.
Only one day of the week can be selected.
Backup setting
4) Click the option button
Use the option button to select the Database Backup function.
Backup setting
Off (Deactivate) : Do not back up the database. (Default)
On (Activate) : Back up the database.
5) Set the output folder.
When database backup was set to On, set the database folder to be backed up using the Browse
button. The initial value is “C:¥TG2000¥databackup”.
* Set the folder to be backed up to an HDD drive different from the C: drive.
Note:
• When filter sign automatic display is deactivated, the filter status is not reflected automatically even
when the filter sign window is selected. When the View filter button is clicked, the filter status is
reflected.
• To use the Schedule Set-up, it is necessary to register the license number of the annual/weekl
y
schedule separately with the AG-150A/G-50A. When the license is not registered with the
AG-150A/G-50A, it only possible to use the weekly schedule function of the AG-150A/G-50A. In this
case, the schedule setting made from the integrated centralized control softwareTG-2000A is
invalidated, resulting in operation failure.
• The set temperature range limit can be reflected onto only the ME remote controller and individual
browser. (This function may not be available from the MA remote controller, depending on the model
of indoor units connected to the system.)
Maintenance Tip
• Manually restart theTG-2000A application and Windows(OS) on a regular basis (once a
week). (Perform the restarting operation during the period from 08:00 to 21:45.)
* Recommendation: Perform manually without automatic rebooting.