Filter
Top Products
87
7) Create a floor plane.
Use the paint brush to edit the floor plane of the selected floor.
8) Exit the paint brush.
Click the paint brush File menu and select the Exit Paint Brush option.
9) Click [OK] button.
After a floor plane has been created, click the [OK] button
*When the [Cancel] button is clicked, this setting is terminated to return to the initial windows.
8.11.7 Set-up relating a sub screen plane view and a plane view (Step 6)
Set the sections (whole floor) to be displayed on the sub-screen, and the floor related items.
Set the whole floor and floor relation items
[Procedure]
1) Select a whole floor.
Use the “
/
” button to select the whole floor to be
displayed on the sub-screen.
2) Select the relation positions.
Select the position to be related from the whole
floor. The selected state will appear.
3) Select the related floor.
Select the related floor from "Selection of a floor".
4) Click the [Set] button.
The selected floor will be related to the whole floor,
and the floor name will appear.
5) When finished with all settings, click the [OK] button.
After relating the floors for the whole floor, click the [OK]
button.
* When the [Cancel] button is clicked, this setting is
terminated to return to the initial windows.
Deleting a floor and floor relation settings
[Procedure]
1) Select a whole floor.
Use the “
/
” button to select the whole floor to be displayed on the sub-screen.
2) Select the selection to be deleted.
Select the floor to be deleted from the whole floor screen.
3) Click the [Delete] button.
When the [Delete] button is clicked, that floor will move to the floor selection.
8.11.8 Set-up of floor name and AG-150A/G-50A (Step 7)
Follow these steps to set the AG-150A/G-50A for each floor.
Set floor and AG-150A/G-50A assignments
[Procedure]
1) Select the AG-150A/G-50A.
In the Floor and G/W Options window, click the check
box of the AG-150A/G-50A to be assigned to each
floor.
: Unassigned
: Assigned
Assign a AG-150A/G-50A to every floor. (Up to 5 of
AG-150A/G-50A can be set to each floor.)
2) Click the [OK] button.
When finished with these settings, click the [OK]
button.
* When the [Cancel] button is clicked, this setting is terminated
to return to the initial window.
Note:
• If the relations of all floors have not been set when the [OK] button is selected, a warning
messa
g
e will a
pp
ear. Check that the re
q
uired floors have been set.
Set-up of floor name and AG-150A/G-50A screen
Check box
Whole floor and floor relation setting
Floor selection
Whole floor selection
Set button
Delete button