50
After setting all items on the initial screen and
selecting the [Finish] button, the confirmation
message [All the contents of a setting are
transmitted to AG-150A/G-50A. Is it all right?]
appears. Select [OK] and transmit the latest
setting information to the AG-150A/G-50A.
8.3 User Set-up
Use these settings to allow or disallowTG-2000A general
operations, printer, charge (billing), and external I/O functions.
Activating TG-2000A Functions
[Procedure]
1) Click the User set-up button
From the Initial window, click the User set-up button
in the User set-up group. The User set-up window appears.
2) Select the [Finish] button after setting all items
Click the [Finish] button after setting all items in
the User setting windows 1 through 4.
* The settings will be invalidated when the [Cancel] button is clicked.
Changing the User setting window
[Procedure]
1) Select [User set-up *] button.
Click the [User setting 1], [User setting 2],
[User setting 3], or [User setting 4] button.
[OK] button
The group information,
etc., is transmitted to the
G-150A/G-50A.
Note:
• If all settings must be transmitted due to a difference in the
system information, etc., carry out "To transmit all settings" in
section "6.3.(1) Shift from initial window to the control window".
User setting 1 window
User setting 2 window
Note:
・Click “Go to the user setting *” to switch between the
user setting windows.
・The settings in each window will be stored even afte
switching to another user setting window. After setting
all the necessary items, click “Finish.”
Note:
・The following folder cannot be specified for "Backu
folder name" of "Backup setting".
x:¥Windows , x:¥WinNT , x:¥Documents and Settings ,
x:¥Program Files , x:¥ProgramData ,
x:¥Users , and C:¥ (“x” shows the drive letter. )
