Filter
Top Products
45
• Energy saving and peak cut setting
Wizard name Primary settings contained in the activated window Reference page
Preparation for energy saving
and peak cut
Verifies the steps and precautions for energy saving and peak cut. 112
Set up of the Watt hour meter for
energy-saving/peak cut
WHM for energy saving and peak cut setting 112
Peak cut set-up Peak cut setting. *Only when using peak cut. 115
Wizard name Primary settings contained in the activated window Reference page
Preparation for night mode set-up Verifies the steps and precautions for night mode set-up. 120
Night mode set-up Sets the outdoor unit for the night mode and the time to carry
out the night mode for each AG-150A/G-50A.
120
Wizard name Primary settings contained in the activated window Reference page
Preparation for
system-changeover set-up
Verifies the steps and precautions for system-changeover
(automatic cooling/heating switching) set-up.
121
System-changeover set-up Sets the main group of the refrigerant system block for carrying
out System-changeover, etc., for each AG-150A/G-50A.
121
Wizard name Primary settings contained in the activated window Reference page
Time set-up Sets the current time. 124
Wizard name Primary settings contained in the activated window Reference page
Maintenance of charge data
(Present value monitor)
Data for the last 62 days from the watt hour meter, indoor units, and
outdoor units can be viewed and edited.
(Also, current values for watt hour meters can be monitored.)
129
Maintenance of charge data
(Meter maintenance)
Watt hour meter data from the last 62 days can be viewed and edited. 133
Maintenance of charge data
(Unit)
Data for the last 62 days from indoor units and outdoor units can be
viewed and edited.
140
Wizard name Primary settings contained in the activated window Reference page
Operation / electric power amount
data monitor
Operation data stored in AG-150A/G-50A can be monitored and
saved.
Also, electric power amount data stored in PLC(or AG-150A/G-50A)
can be monitored and saved.
135
Wizard name Primary settings contained in the activated window Reference page
Remedial apportioning setting Remedial apportioning can be tentatively performed when charging
trouble occurs.
137
Wizard name Primary settings contained in the activated window Reference page
Billing comparison data
maintenance
The data used to compare apportioned charges when the
AG-150A/G-50A or PLC fails can be cleared.
151
Wizard name Primary settings contained in the activated window Reference page
Billing trial operation This function enables trial operation of the power apportion billing.
A state similar to the actual charge calculation can be calculated and
confirmed in one day.
182
Option functions
Option functions
Option functions
Option functions
Option functions
Option functions
Option functions
Option functions