Filter
Top Products
95
Monitor the PLC version
[Procedure]
1) Select the PLC No.
Select the PLC No. by clicking the “
” button.
2) Select the [Monitor] button.
Click the [Monitor] button in the PLC Connection Set-up screen. The PLC software type and
version are monitored and the results appear.
* A warning message appears if the address setting or communication confirmation fails. Check the setting details.
* Proper communication can be confirmed with the PLC version monitor.
Initialize the PLC
[Procedure]
1) Select the PLC No.
Select the PLC No. by clicking the “
” button.
2) Select the [Initial Setting] button.
When the [Initial Request] button on the PLC Connection Set-up screen is clicked, the PLC
memory is initialized so that it can be used.
Close the PLC Connection Set-up window
[Procedure]
1) After making all of the settings, select the [OK] button.
* When the [Cancel] button is clicked, this setting is terminated to return to the initial window.
8.13.4 Measurement meter set-up (Step 3)
Set the meter type, name, installation place and pulse
unit.
1) Select the PLC No. with the
button.
Select the PLC No. to be set by clicking the “
” button.
2) Select the meter to be used.
: Selected
: Not selected
3) Set the name, installation place and pulse unit.
Set the applicable type, name, installation place and
pulse unit of the selected meter.
* Applicable type: Air conditioner, electricity 1, electricity 2, gas,
water, calorific value
4) After making all of the settings, select the [OK] button.
* When the [Cancel] button is clicked, this setting is terminated to return to the initial window.
Note:
• All settings are initialized when the PLC is initialized, and all data is erased. This "Initial
Setting" must be carried out only once when initially setting the PLC.
If executed during operation, the electric amount data will be erased and the electricity charge
apportionment will not be calculated correctly.
Note:
• Up to 20 characters can be input for the name and installation place. (Single quotations (')
cannot be used.)
•
A
lways set the meter pulse unit. If not set, the cumulative usage amount will not be correctly
measured and the charging function will not work properly.
• Only the pulse setting can be monitored with the monitor button.
Measurement meter set-up screen