Filter
Top Products
203
2. Windows XP
1) Select [Run] in the [Start] menu.
2) Enter ”control userpasswords2” in the field and click [OK].
3) Uncheck the box next to “Users must enter a user name and
password to use this computer.”
4) Click [OK].
3. Windows 2000
1) Select the [User and password] of [Control Panel].
2) Confirm that the check box "It is necessary to input the
user name and password to use this computer" is not
checked.
If it is checked, remove the check. It is necessary to
select the user name Administrator, and then to input the
user name and password.
Click the [Application] button and the Auto log-on setting
screen is displayed.
3) Set the user name and password.
Set the user name and password optionally on the Auto
log-in screen.
* It is possible to set the user name and password
optionally, but it is recommended to set the following
contents.
User name : Administrator
Password : TG-2000A
After completing the setting, click the [OK] button.
4) Since the screen is returned to the user name/password
screen, click the [OK] button to exit the operation.
Note:
This chapter briefly describes the setting procedure.
For details, refer to the attached “Windows® XP Professional” Manual.
Note:
This chapter briefly describes the setting procedure.
For details, refer to the attached “Windows® 2000 Professional” Manual.