Filter
Top Products
• "Always connected to AG-150A/G-50A system - Deactivate":
Refers to charging method that connects this integrated centralized control software
TG-2000A to the AG-150A/G-50A and PLC once a month via the LAN. The charges for
the last month are calculated and output at once. The charging function can be used
efficiently by starting the computer and integrated centralized control software
TG-2000A on the day after the set settlement date.
PI controller instead of the PLC can be connected.
•
"IC I/O signal" : Refers to a contact mounted on the air conditioner's indoor unit. A general equipment can
be connected to the IC I/O signal using this contact and a PLC for general equipment to
operate and monitor the system.
•
"DIDO controller": Refers to the controller (PAC-YG66DCA) that can monitor or control general
(DC) equipment.
•
"AI controller" : Refers to the controller (PAC-YG63MCA) that has a function to measure temperature
(MCT) and humidity.
•
"PI controller" : Refers to the controller (PAC-YG60MCA) that has a function to calculate cumulative
(MCP) pulses from such metering devices as watt-hour meter.
- About screen -
• This instruction manual may use the development version screen in some case.
- Simple operation manual -
• A simple operation manual is available in addition to this instruction manual (Site adjustment, Management).
The simple operation manual is stored as a pdf file in the "Manual" folder on the TG-2000A Setup CD.
Acrobat Reader (Version 5.0E or later recommended) is required to view this pdf file.