Filter
Top Products
114
2) Select the control details with the
button.
Select the control details for energy saving operation by clicking
.
Control details: No control
Performance save rate 0.6 to 0.9 (0.1 increments)
3) Select the control time with the
button.
Select the control time for energy saving operation by clicking
.
The following times can be set when a setting other than "No control" is selected for the control
details.
Control time: 3 minutes
6 minutes
9 minutes
15 minutes
30 minutes
4) Repeat steps 1) to 3).
Repeat steps 1) to 3) for the outdoor units set for energy saving.
Finish setting the energy saving function, and send the set details to the AG-150A/G-50A
1) Click on the [OK] button.
When finished with the settings, click on the [OK] button.
The set details will be sent to the AG-150A/G-50A and the Energy Saving Setting screen will close.
Note:
• The indoor units connected to the target outdoor units are displayed in the "Control group" field.
• If the settings are the same for each outdoor unit, use the "Copy" and "Paste" functions to make the
process easier.
Caution
Energy save function on the outdoor unit
・ Only the inverter models of A-control outdoor units can be put on the energy save control.
・ When the settings are transmitted to AG-150A/G-50A, only the settings for the inverter models
of A-control outdoor units will be made. Do not make the energy save setting for the constant
speed models of A-control outdoor units, for the wrong settings can be made for some of the
constant speed models of A-control outdoor units.
・ Transition to the setting screen will take some time because AG-150A/G-50A monitors the
information on the A-control outdoor units.
・ To make the settings for the energy save function for the first time, the constant speed models
of A-control outdoor units will be displayed if AG-150A/G-50A is not connected, because the
information on the unit cannot be monitored.
・ In the option menu under “Unit,” “OC” stands for outdoor units other than A-control models, and
“AOC” stands for A-control outdoor units.
・ When the energy save setting is monitored on the G-50A, using the monitor refresh button, the
connected A-control outdoor units will be displayed only when the G-50A version is 2.90 or later.
If the version is 2.80 or older, energy save function for A-control outdoor units is not supported.