Filter
Top Products
86
8.11.5 Set-up of the number of floors, and floor name (Step 4)
Follow these steps to set the number of floors being managed (floor count) and floor names.
Set the number of floors and floor names.
[Procedure]
1) Click the “
/
” button to select the number of floors
Clicking “
/
” button selects the number of floors.
2) Click in the Floor name cell. Enter a name for each
floor.
Click the floor name cell to be set. The cell is now
ready to receive text.
Now enter the name of the floor. Do this for each floor.
3) Click [OK] button.
When finished with these settings, click the [OK] button.
* When the [Cancel] button is clicked, this setting is terminated to
return to the initial windows.
8.11.6 Creation of a plane view (Step 5)
Follow these steps to create a floor plane for each floor. This floor plane is used in air conditioning
operation and supervision for each floor. If not displaying a floor plane, it is not necessary to create
one. (The background is white.)
Create a floor plane for each floor
[Procedure]
1) Click the Base [Change] button.
In the Floor Plan Settings window, click the [Change]
button to edit the base plane. The paint brush appears. A base plane serves as a basis for each floor
screen. To create the floor screen for each floor, copy the
base drawing and modify it to suit each floor.
2) Create a base plane.
Create a base plane with the paint brush.
* For details, see the Windows users guide.
3) Exit Paint Brush Mode.
Click the file menu and select the Exit Paint Brush
option. Select “Yes” on “the save confirmation screen”.
4) Select a floor using the “
/
” button
Use the “
/
” button to select the floor to be modified.
5) Click the Base [Copy] button.
To apply the created base drawing to the selected
floor, click the Base [Copy] button. It is not necessary
to click the Base Copy button when creating a new
floor plane.
6) Click the [Change] button
To create or edit a floor plane for the selected floor,
click the [Change] button. The paint brush starts up,
and the floor plane can be edited.
Note:
• The minimum number of floors is 1, the maximum is 99
• Floor names can be a maximum of 16 characters. (Duplicate settings are possible. Single
quotations ['] cannot be used.)
Set-up of the number of floors, and floor
Floor name
Maintenance Tip
• When Paint Brush Mode is activated, the file
name and graphic size is set and should no
t
be changed. If changed, the floor plane ma
y
not display correctly.
(*Base plane:
Name: Floor000.bmp Size: W1000 H575)
Base plan
e
Floor plan
e
Floor selection
Creation of a plane view screen
Paint Brush window (initial state)