Filter
Top Products
47
7.3 Shutdown
TG-2000A Shutdown
Follow these steps to shutdown TG-2000A.
[Procedure]
1) Select the End option in the File menu in the Menu Bar
Always end the application before turning off the power.
Shutdown is done from the initial window.
Select the File menu in the Menu Bar and select the End
option.
* To switch to the Initial window, refer to section 6.3.
2) Select [Exit] button.
The shutdown confirmation dialog box appears asking to
confirm this action.
After verifying the content of the dialog box, click the [Exit]
button to exit the application.
* Click the [Cancel] button to return to the Initial window.
Shutting down the OS
Shut down the Windows(OS) after verifying that the TG-2000A application has been exited. Turn off
the PC after shutting down the OS.
* Please see the OS or PC owner’s manual for procedures on shutting down the OS and turning off the PC.
Maintenance Tip
• Always exit the TG-2000A application before
turning off the PC. Failing to do so could result in
damage.
• Note that when the TG-2000A application is
exited, the functions used stop. When the charge
calculation function (only for constant operation)
is used, set the operation mode to TG-2000
A
24-hour continuous operation.
• If the message "There is data which has no
t
been transmitted to AG-150A/G-50A. Please end
after choosing "Cancel" button, choosing a
"Finish" button and transmitting data." appears
on the End warning display screen, always clic
k
"Cancel", and click the "Finish" button on the
initial window, and then transmit the setting
changes to the AG-150A/G-50A before ending.
End the application
Shutdown verification
End confirmation window (with warning)