Filter
Top Products
32
(5) Installation start confirmation
1) Confirm that you want to start the installation and
select the [Next] button.
If the [Next] button is clicked the installation will start.
* Click the [Cancel] button to stop the installation.
(6) TG-2000A setup completion
1) Select [Finish] button
Click [Finish] button on installation screen.
2) After the installation is completed, restart the computer.
When the installation is completed, the program is
registered in the start menu and automatically run from
the next time the computer is started.
Store the CD is a safe place.
(7) Setting up the Firewall at TG-2000A startup
1) Configure the ignore list for the Firewall.
When starting up TG-2000A, a popup window will appear,
asking if you want to block the program.
Click [Unblock] to exclude the program from the Firewall.
*If the popup window becomes hidden behind the TG-2000A window, press
[Alt] and [Tab] simultaneously to bring up the window on the right,
and select Windows Firewall.
Note:
• Be sure to restart the computer
after installing TG-2000A.
• Mail tool is installed in both standard and wide area mode.
• Launch TG-2000A in the “Wide area” mode from the “Site change tool.”
Refer to “Chapter 4 The Usage of the Site Change Tool” in the manual (Wide area) for information on
“Site change tool.”
Windows Securit
y
Alert