Filter
Top Products
107
Set the unit price and charge time zone.
[Procedure]
1) Select the weekly charge [Change] button.
Select the weekly charge [Change] button
on the Charge Setting screen to open the
Weekly Charge Setting screen.
2) Select the day to be set.
Click the day to be set, and select the [Set]
button from the submenu. The Time Zone
Set-up window opens.
3) Set the unit price and charge zone times.
Set the start and end times for the charge
zone, and select the unit price.
• Unit price: Maximum five units
• Time zone: Maximum 10 zones (per day)
4) Select the [OK] button on the Time Zone
Set-up window.
After setting the unit price and time zone,
select the [OK] button on the Time Zone
Set-up window.
* Repeat steps 2) to 4), and set all days.
* The settings can also be made from the
keyboard.
* When there is a seasonal period, set both the
normal and seasonal charges.
Change between the settings with the [Normal
charges] and [Seasonal charges] button.
5) Set the unit price.
Set the unit price in unit prices 1 to 5.
* The settings can also be made from the keyboard.
Click the box for unit prices applied to the heat storage
charges.
(Selected)
(Not selected)
* Set only the unit price being used. When using the
seasonal charges or heat storage charges, set these
unit prices also.
* If electricity 1 and electricity 2 are selected with the
batch button, all unit prices can be set in a batch.
6) Select the [OK] button to end the settings.
* If the [Cancel] button is clicked on, the settings will be
canceled and the Rate Setting screen will open
.
Note:
• If there is an open field (including a 0 value) in the setting items, a caution appears. Check the
settings.
• The weekly charges can also be set from the Management window.
• As the default, the time zone only for the unit price 1 is set. The default unit price is 0.
• The air-conditioning charge's "charge percentage" is calculated using the unit price set on this
screen, even for the power apportionment billing (manual electric amount input) function (*1).
*1: Power apportionment billing function without WHM connected.
• The unit prices are also used for the annual charge settings, so take care when making an
y
changes.
Set button
The unit price time zone can be
set, copied, pasted or canceled.
Unit price
Set the unit price.
Weekly Charge Setting screen
Batch
button
A
ll unit
prices can
be set in a
batch.
Normal/
Season
button
Time Zone Set-up screen