Filter
Top Products
23
5) Select the installation mode.
Select [Standard] or [Wide area] by checking the radio button,
and click [Next].
Standard : The mode which connects one site by dedicated
lines (LAN etc.) by TG-2000A, and carries out
monitor/operation.
Wide area : The mode which carries out monitor/operation
of two or more sites by TG-2000A.
6) Make the final confirmation.
Click [Install] to begin installation.
7) When the installation is complete, the screen on the right appears.
Click [Finish] to complete the installation process.
8) Restart the computer.
After the installation is completed, restart the computer. When the installation is completed,
the program is registered in the start menu. And it automatically run from the next time when the
computer is started.
Store the CD in a safe place.
9) Setting up the Firewall at TG-2000A startup
When starting up TG-2000A, a popup window will appear,
asking if you want to block the program.
Click [Unblock] to exclude the program from the Firewall.
*If the popup window becomes hidden behind the TG-2000A window, press
[Alt] and [Tab] simultaneously to bring up the window on the right,
and select Windows Firewall.
Note:
• Be sure to restart the computer
after installing TG-2000A.
• Mail tool is installed in both standard and wide area mode.
• Launch TG-2000A in the “Wide area” mode from the “Site change tool.”
Refer to “Chapter 4 The Usage of the Site Change Tool” in the manual (Wide area) for information on
“Site change tool.”
Select
Windows Securit
y
Alert